Pre-terminated optical fiber patch cords are available in MTP-MTP and MTP-LC types. Each patch cord is 100% tested in the factory, has low insertion loss and complies with international standards and data center requirements. Each opening in the optical fiber harness is numbered for easy use and maintenance.
• Standard high-precision MPO/MTP optical fibre connectors and simplex/duplex LC/SC connectors are used in this product.
• It is available in 6 cores, 8 cores, 12 cores, 16 cores, etc.
• A wide range of cable arrangement products are available.
• Rapid upgrading to support parallel transmission system applications.
• The length of trunk and branch harnesses can be custom-ized.
• Multiple flame retardant outer sheaths are available: LSZH,OFNR, OFNP.
Optical Fiber Performance:
| Fiber Type | Core/Cladding Diameter (μm) |
Effective Modal Bandwidth (MHz·km) |
Operating Wavelength (nm) |
Maximum Attenuation (dB/km) |
|---|---|---|---|---|
| G.657.A2 | 9/125 | NA | 1310/1550 | 0.35/0.21 |
| BI OM3 | 50/125 | 2000 | 850/1300 | 2.4/0.6 |
| BI OM4 | 50/125 | 4700 | 850/1300 | 2.4/0.6 |
| BI OM5 | 50/125 | 4700@850nm, 2470@953nm | 850/953/1300 | 2.4/1.7/0.6 |
Insertion Loss and Return Loss Specifications:
| Loss Grade | IL (dB) | RL (dB) |
|---|---|---|
| MTP Multimode High Precision | ≤0.25 | ≥28 |
| MPO Multimode High Precision | ≤0.25 | ≥25 |
| MTP Singlemode High Precision | ≤0.35 | ≥65 |
| MTP Multimode Standard Precision | ≤0.35 | ≥28 |
| MPO Multimode Standard Precision | ≤0.35 | ≥25 |
| MPO Singlemode Standard Precision | ≤0.60 | ≥65 |
| LC Multimode Connector | ≤0.10 | ≥36 |
| LC Singlemode Connector | ≤0.25 | ≥60 (APC) / ≥55 (UPC) |
| SC Multimode Connector | ≤0.10 | ≥36 |
| SC Singlemode Connector | ≤0.25 | ≥60 (APC) / ≥55 (UPC) |
| ST Multimode Connector | ≤0.10 | ≥36 |
| ST Singlemode Connector | ≤0.25 | ≥55 (UPC) |
| FC Multimode Connector | ≤0.10 | ≥36 |
| FC Singlemode Connector | ≤0.25 | ≥60 (APC) / ≥55 (UPC) |
Connector Performance:
| Loss Grade | IL (dB) | IL Variation After High/Low Temperature Cycling (dB) | RL (dB) | RL Variation After High/Low Temperature Cycling (dB) |
|---|---|---|---|---|
| MTP Multimode High Precision | ≤0.25 | ≤0.20 | ≥28 | ≤5 |
| MPO Multimode High Precision | ≤0.25 | ≤0.20 | ≥25 | ≤5 |
| MTP Singlemode High Precision | ≤0.35 | ≤0.30 | ≥65 | ≤5 |
| MPO Singlemode Standard Precision | ≤0.60 | ≤0.30 | ≥65 | ≤5 |
Copyright © Shanghai Loraycom Technology Co., Ltd. all rights reserved Web design
